Ensure that any of the problems above is not the reason; Ensure that the dial-up application is correctly installed and set on your PC; MT has considered the household arrangements, enabling horizontal and vertical positions as well as hanging on the wall. This field will be dimmed unavailable for entry unless you specify ICMP as the protocol. Setup a static IP address on either your computer or device that you want to forward a port to. I already Pmed you

Uploader: Grojar
Date Added: 2 February 2016
File Size: 33.41 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 45073
Price: Free* [*Free Regsitration Required]

When you are done selecting criteria, ensure that the Enable button is selected at the top of the page, hjawei then click the Submit button at the bottom of the page. This also should be left at the default setting Enabled. A rule will be active only if its security level is the same as the globally configured setting shown on the main IP Filter page.

Huawei SmartAX MT800 User Manual: Ip Route Table Configuration

Ip Filter Configuration time that you specify. It usually does not matter which browser you choose to use.

Figure Ilmi Ilmi: Enter your username and password now.

I try to access Select Refresh rate from the drop-down menu. Provided 4 priority queues.


This operation will let you lose your custom setting. This selection specifies which type of Internet communication will be subject to this translation rule. Your router’s IP address can also be refered to as your computer’s default gateway. Ethernet port, connecting to PC or hub. Please click on icon to reveal PPP Interface page.

Select Send Mode and Receive Mode. Select the Virtual Circuit and click the Submit button. Adding An Ip Filter Rule interfaces is Accept, so that all accesses to your LAN initiated from external computers are denied discarded at the public interfaceexcept for those allowed by a specific IP Filter rule. If the conditions of network have been changed by the modification of security, scale, line of communication, protocol and topology, for example, a demand of particular VPI and VCI, you should adjust accordingly the default settings to be able to adapt to the changes.

Connecting Mt User name, password 2. Please select the eth value from pull-down menu, and click Add button as well.

Waterproof should be used during the storage, transportation and running of the equipment. Means a complementary description.

Driver Modem Huawei Smartax Mt – act-app

Your router has a web interface, so you will login to it using your web browser. Use the Protocol drop down box to select the protocol type of the ports you are forwarding.


Port number criterion for the msartax s from which the packet originates.

This enables the PVC used for the initial connection. Chapter 4 Web-based Management Chapter 4 Web-based Management This chapter describes how to use the web-based management software to configure the MT, which introduces the signification of parameters and method of setting in the configuration interface.

Parameters explanation Traffic Id: Enter the starting port ID or a range that you expect to see on incoming packets destined for the LAN computer for which this rule is being created. Means reader be extremely careful during the operation.

Forum Announcement

Please contact with your ISP about this problem. Chapter 6 Troubleshooting Chapter 6 Troubleshooting 6. Click the Other Settings link. You can specify that data from all LAN addresses should be translated by typing 0 zero in each From field and in ssmartax To field.